Telit Wireless Solutions WE866E4-P - Socket Information

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 87 2018-02-16
PRELIMINAR
Y
Table 165, page 87, describes the Socket Create parameters.
Response
Table 166, page 87, describes the responses and remarks for Socket Create command.
Synchronous Response
Table 167, page 87, describes the synchronous responses and remarks for Socket Create
command.
9.2.6 Socket Information
This command is used to get the information of the socket. Prior to issuing this command,
user is required to establish L2 and L3 connection.
Command Syntax AT+SI=<CID>
Table 165 Socket Create Parameters
Parameters Mandatory/Optional Value Description
Family Mandatory
Value range:2-5
Format: Integer
Default value: 0
It specifies the communication domain in
which a socket is required to be created.
Type Mandatory
Value range:1-3
Format: Integer
Default value: 0
It specifies the type of socket to be created.
Protocol Optional
Value range:
0-255,
1536-2147483647
Format: Integer
Default value: 0
It specifies the particular protocol to be
used along with the socket.
Table 166 Socket Create Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 167 Socket Create Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.