Telit Wireless Solutions WE866E4-P - SSL Certificate List

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 95 2018-02-16
PRELIMINAR
Y
Asynchronous Response
Table 189, page 95, describes the asynchronous responses and remarks for SSL Certificate
Delete command.
9.3.1.2 SSL Certificate List
This command is used to list the certificate/CA data from the non-volatile Memory. It is
issued anytime irrespective of any operation.
Command Syntax AT+NSSLCERTDELETE=<Certificate Type>,<Certificate Name>
Parameter Description
Table 190, page 95, describes the SSL Certificate List parameters.
Response
Table 191, page 95, describes the responses and remarks for SSL Certificate list command.
ERROR If parameter is not valid.
Table 188 SSL Certificate Delete Synchronous Response
Responses Remarks
Table 189 SSL Certificate Delete Asynchronous Response
Responses Remarks
AT+NSSLCERTDEL=0,cer
tificate<CR><LF><CR><L
F>OK<CR><LF>
Successful
ERROR If any other parameters.
Table 190 SSL Certificate List Parameters
Parameters Mandatory/Optional Value Description
Certificate Type Mandatory
Value range:0-3
Format: Integer
Default value: 0
It specifies the type of certificate,
0 - For CA certificate,
1- For client/server certificate.
Table 191 SSL Certificate List Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.