Telit Wireless Solutions WE866E4-P - NMDNS Service De-Registration

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 127 2018-02-16
PRELIMINAR
Y
Synchronous Response
Table 274, page 127, describes the synchronous responses and remarks for NMDNS
Service Registration command.
10.1.2.5 NMDNS Service De-registration
This command is used for service de-registration in mDNS module. Prior to issuing this
command the user is required to issue mDNS start, set the Host name and service register
command.
Command Syntax AT+NMDNSSRVDEREG=<Service>
Parameter Description
Table 275, page 127, describes the NMDNS Service De-registration parameters.
Response
Table 276, page 128, describes the responses and remarks for NMDNS Service
De-registration command.
Table 273 NMDNS Service De Registration Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 274 NMDNS Service Registration Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 275 NMDNS Service De-registration Parameters
Parameters Mandatory/Optional Value Description
Service Mandatory
Value range:1-64
Format: String
Default value:
_QCA4020._MyD
evice._tcp.local
It specifies the instance name of the
service to be de-registered.