Telit Wireless Solutions WE866E4-P - NDNS Client Resolve URL

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 74 2018-02-16
PRELIMINAR
Y
8.2.5 NDNS Client Resolve URL
This command is used to resolve the URL in DNS module. Before resolving the Client
request, issue DNS start and server addition commands.
Command Syntax AT+NDNSCRURL=<URL>, [<IP version>]
Parameter Description
Table 135, page 74, describes the NDNS Client Resolve URL parameters.
Response
Table 136, page 74, describes the responses and remarks for NDNS Client Resolve URL
command.
Synchronous Response
Table 137, page 75, describes the synchronous responses and remarks for NDNS Client
Resolve URL command.
Table 134 NDNS Server Stop Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 135 NDNS Client Resolve URL Parameters
Parameters Mandatory/Optional Value Description
URL Mandatory
Value range:1-64
Format: String
Default
value:www.telit.co
m
It specifies the URL to be resolved.
IP version Optional
Value range: 4,6
Format: Integer
Default value: 4
It specifies the IP version of the URL to be
resolved.
Table 136 NDNS Client Resolve URL Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.