Telit Wireless Solutions WE866E4-P - Socket Bind

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 83 2018-02-16
PRELIMINAR
Y
Response
Table 154, page 83, describes the responses and remarks for Socket Accept command.
Synchronous Response
Table 155, page 83, describes the synchronous responses and remarks for Socket Accept
command.
9.2.2 Socket Bind
This command is used to bind the socket. Prior to issuing this command, user is required to
establish L2 and L3 connection.
Command Syntax AT+SB=<CID>,<Local IP Address>,<Port Number>
Parameter Description
Table 156, page 84, describes the Socket Bind parameters.
Table 154 Socket Accept Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 155 Socket Accept Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.