WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 15 2018-02-16
PRELIMINAR
Y
2.2.2 AT Command Syntax
Table 3, page 15, describes the syntax rules followed by Telit implementation used in this
manual for software procedures that are explained using the AT command line interface.
2.3 Information Response and Result Codes
TBD
Table 3 AT Command Syntax
Convention Type Description
command syntax
monospaced font
This monospaced font represents command strings entered on a
command line and sample source code.
AT XXXX
Proportional font
description
Gives specific details about a parameter.
<Data> DATA
UPPERCASE
Variable parameter
Indicates user input. Enter a value according to the descriptions that
follow. Each uppercased token expands into one or more other token.
lowercase
Keyword parameter
Indicates keywords. Enter values exactly as shown in the command
description.
To Next Page
Loading...