Telit Wireless Solutions WE866E4-P - Transmit Output Power

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 24 2018-02-16
PRELIMINAR
Y
Response
Table 8, page 24, describes the responses and remarks for Set Time command.
Synchronous Response
Table 9, page 24, describes the synchronous responses and remarks for Set Time command.
Example AT+YTIME=09/01/12,11:15:00+04
OK
6.2.2 Get Time
This command is used to get the Julian time from RTC module.
Command Syntax AT+YTIME?
Parameter Description
Table 10, page 25, describes the Get Time parameters.
Table 7 Set Time Parameters
Parameters Mandatory/Optional Value Description
Absolute
Time
Mandatory
Value range: 0-1
Format: Integer
Default value:
09/01/12,11:15:00
+04
It specifies the absolute time to be set
Table 8 Set Time Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 9 Set Time Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.