WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 25 2018-02-16
PRELIMINAR
Y
Response
Table 11, page 25, describes the responses and remarks for Get Time command.
Synchronous Response
Table 12, page 25, describes the synchronous responses and remarks for Get Time
command.
Table 10 Get Time Parameters
Parameters Value Description
Time
Value range: 0-1
Format: Integer
Default value:
09/01/12,11:15:00
+04
It specifies the time that has been set.
Table 11 Get Time Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 12 Get Time Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
To Next Page
Loading...