Telit Wireless Solutions WE866E4-P - Provisioning; Web Provisioning

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 136 2018-02-16
PRELIMINAR
Y
Table 295, page 136, describes the responses and remarks for FWUP Trial Image
command.
Synchronous Response
Table 296, page 136, describes the synchronous responses and remarks for FWUP Trial
Image command.
10.2.2 Provisioning
10.2.2.1 Web Provisioning
This command is used to start the server with HTTP. Before issuing this command is
required to issue L2 and L3 commands.
Command Syntax AT+WNWEBPROV=<Start>,[<Port Number>,<SSL Flag>,<Server
Certificate>,<Server Key>,<Server CA>]
Parameter Description
Table 297, page 137, describes the Web Provisioning parameters.
Table 295 FWUP Trial Image Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 296 FWUP Trial Image Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.