Telit Wireless Solutions WE866E4-P - Udp;Tcp; Secured (SSL); SSL Certificate Delete

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 94 2018-02-16
PRELIMINAR
Y
9.3 UDP/TCP
9.3.1 Secured (SSL)
9.3.1.1 SSL Certificate Delete
This command is used to delete a list of certificate/CA data in non-volatile Memory. It is
issued anytime irrespective of any operation.
Command Syntax AT+NSSLCERTDELETE=<Certificate Type>,<Certificate Name>
Parameter Description
Table 186, page 94, describes the SSL Certificate Delete parameters.
Response
Table 187, page 94, describes the responses and remarks for SSL Certificate Delete
command.
Synchronous Response
Table 188, page 94, describes the synchronous responses and remarks for SSL Certificate
Delete command.
Table 186 SSL Certificate Delete Parameters
Parameters Mandatory/Optional Value Description
Certificate Type Mandatory
Value range:0-3
Format: Integer
Default value: 0
It specifies the type of certificate,
0 - For CA certificate,
1- For client/server certificate.
Certificate Name Mandatory
Value range:0-50
Format: String
Default value: 0
It specifies the certificate name.
Table 187 SSL Certificate Delete Response
Responses Remarks
OK Success.
Table 188 SSL Certificate Delete Synchronous Response
Responses Remarks
OK Success.