Telit Wireless Solutions WE866E4-P - Socket Receive

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 90 2018-02-16
PRELIMINAR
Y
Response
Table 175, page 90, describes the responses and remarks for Socket Listen command.
Synchronous Response
Table 176, page 90, describes the synchronous responses and remarks for Socket Listen
command.
9.2.9 Socket Receive
This command is used to receive data from any client device. Prior to issuing this
command, user is required to establish L2 and L3 connection.
Command Syntax AT+SR=<CID>,<Length>
Parameter Description
Table 177, page 91, describes the Socket Receive parameters.
Table 174 Socket Listen Parameters
Parameters Mandatory/Optional Value Description
CID Mandatory
Value range:0-15
Format: Integer
Default value: 0
It specifies the value given by issuing
AT+SC command.
Backlog Optional
Value range:0-15
Format: Integer
Default value: 0
It specifies the maximum length of the
pending connection handled that may
evolve.
Table 175 Socket Listen Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 176 Socket Listen Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.