WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 96 2018-02-16
PRELIMINAR
Y
Synchronous Response
Table 192, page 96, describes the synchronous responses and remarks for SSL Certificate
List command.
Asynchronous Response
Table 193, page 96, describes the asynchronous responses and remarks for SSL Certificate
List command.
9.3.1.3 SSL Certificate Store
This command is used to store the list of certificate/CA data from the non-volatile Memory.
It is issued anytime irrespective of any operation.
Command Syntax AT+NSSLCERTDELETE=<Certificate Type>,<Sequence>,<Certificate
Name>,<Certificate data>
Parameter Description
Table 194, page 97, describes the SSL Certificate Store parameters.
Table 192 SSL Certificate List Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 193 SSL Certificate List Asynchronous Response
Responses Remarks
AT+NSSLCERTLIST=0/1/
2<CR><LF><CR><LF>O
K<CR><LF>
Successful
ERROR If any other parameters.
To Next Page
Loading...