Telit Wireless Solutions WE866E4-P - 8 Network; Network Interface Filter; Dns; NDNS Server Start

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 70 2018-02-16
PRELIMINAR
Y
8 Network
This chapter describes commands for configurations and operations related to Network
layer.
• Network Interface Filter, page 70
• DNS, page 70
8.1 Network Interface Filter
Content required
8.2 DNS
8.2.1 NDNS Server Start
This command is used to start DNS server. Prior to starting the server the user is required
to issue L2 and L3 commands.
Command Syntax AT+NDNSSSTART
Parameter Description
Table 123, page 70, describes the NDNS Server Start parameters.
Response
Table 124, page 71, describes the responses and remarks for NDNS Server Start command.
NOTE:
Table 123 DNS Server Start Parameters
Parameters Mandatory/Optional Value Description
Start Mandatory
Value range:N/A
Format: N/A
Default value:
N/A
It indicates the server to start.