Telit Wireless Solutions WE866E4-P - NMDNS Service Registration

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 126 2018-02-16
PRELIMINAR
Y
Synchronous Response
Table 271, page 126, describes the synchronous responses and remarks for NMDNS Host
Name Registration command.
10.1.2.4 NMDNS Service Registration
This command is used for service registration in mDNS module. Prior to issuing this
command the user is required to issue mDNS start and set the Host name command.
Command Syntax AT+NMDNSSRVREG=<Instance Name>,<Type/Protocol>,<Port Number>
Parameter Description
Table 272, page 126, describes the NMDNS Service Registration parameters.
Response
Table 273, page 127, describes the responses and remarks for NMDNS Service
Registration command.
Table 271 NMDNS Host Name Registration Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 272 NMDNS Service Registration Parameters
Parameters Mandatory/Optional Value Description
Service Mandatory
Value range:1-32
Format: String
Default value:
_QC4020
It specifies the instance name of the
service to be registered.
Protocol Mandatory
Value range:1-32
Format: String
Default value:
__MyDevice._tcp.l
ocal
It specifies the type or protocol of the
service to be registered.
Port Number Mandatory
Value
range:1-9000
Format: Integer
Default value: 80
It specifies the port number of the service
to be registered.