Telit Wireless Solutions WE866E4-P - Socket Listen

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 89 2018-02-16
PRELIMINAR
Y
Response
Table 172, page 89, describes the responses and remarks for Socket Status Information
command.
Synchronous Response
Table 173, page 89, describes the synchronous responses and remarks for Socket Status
Information command.
9.2.8 Socket Listen
This command is used to listen to a socket. Prior to issuing this command, user is required
to establish L2 and L3 connection.
Command Syntax AT+SL=<CID>,[<Backlog>]
Parameter Description
Table 174, page 90, describes the Socket Listen parameters.
Table 171 Socket Status Information Parameters
Parameters Mandatory/Optional Value Description
CID Mandatory
Value range:0-15
Format: Integer
Default value: 0
It specifies the value given by issuing
AT+SC or AT+SA command.
Reset
counters
Optional
Value range:0,1
Format: Integer
Default value: 0
It specifies whether to reset the counter or
not,
1- resets the counter
0- does not resets the counter.
Table 172 Socket Status Information Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 173 Socket Status Information Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.