Telit Wireless Solutions WE866E4-P - Page 93

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 93 2018-02-16
PRELIMINAR
Y
Response
Table 184, page 93, describes the responses and remarks for Socket Send command.
Synchronous Response
Table 185, page 93, describes the synchronous responses and remarks for Socket Send
command.
Table 183 Socket Send Parameters
Parameters Mandatory/Optional Value Description
CID Mandatory
Value range:0-15
Format: Integer
Default value: 0
It specifies the value given by issuing
AT+SC command for UPD or AT+SA for
TCP.
Destination
Address
Optional
Value range:7-40
Format: Integer
Default value:
0.0.0.0
It specifies the destination IP address for
the data to be sent.
Port Number Optional
Value range:
0-65535
Format: Integer
Default value: 0
It specifies the destination port number for
the data to be sent.
Data Optional
Value range:
1-1460
Format: Integer
Default value:
Welcome to Telit
It specifies the data to be sent.
Table 184 Socket Receive Send Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 185 Socket Send Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.