Telit Wireless Solutions WE866E4-P - Page 28

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 28 2018-02-16
PRELIMINAR
Y
Parameter Description
Table 18, page 28, describes the Set Profile parameters.
Response
Table 19, page 28, describes the responses and remarks for Set Profil command.
Synchronous Response
Table 20, page 28, describes the synchronous responses and remarks for Set Profile
command.
Table 18 Set Profile Parameters
Parameters Mandatory/Optional Value Description
Profile
Number
Mandatory
Value range: 0-1
Format: Integer
Default value:
N/A
It specifies the profile number to be set.
Table 19 Set Profile Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 20 Set Profile Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.