Tormach 1100M - Page 11

©Tormach® 2023
Specifications subject to change without notice.
Page 11 Tormach 1100M® Operator's Manual (Version 1223A)
For the most recent version, see tormach.com/support
TABLE OF CONTENTS
About Rectangular Pockets 133
Create Hole Locations on a Part (Drill/Tap) 134
About Drilling and Tapping 135
Drilling and Tapping in PathPilot 135
Create a Drilling Sequence 135
Create a Tapping Sequence 136
Drilling and Tapping Reference 136
Create Threads on a Part 136
About Thread Milling 137
Thread Milling in PathPilot 137
Thread Milling Reference 137
Create Text to Engrave on a Part 138
About Engraving 138
Import a DXFFile 138
Working with Layers and Shapes 139
Change the Layer or Shape Cut Order 139
Adjust the Tree View Window 139
Working in the Preview Window 139
7.2 Machine Settings and Accessories 139
7.2.1 Enable an Internet Connection 140
Connect to Dropbox 140
Enable Automatic Updates 141
7.2.2 Change the Network Name 142
7.2.3 Select the Spindle Type 142
7.2.4 Change the Screen Orientation 142
About Portrait Screen Layout 143
7.2.5 Specify the Tool Change Method 144
About Automatic Tool Changes 144
About Manual Tool Changes 144
7.2.6 Disable Limit Switches 144
7.2.7 Limit G30 Moves 145
About G30 145
7.2.8 Enable the On-Screen Keyboard 145
About Soft Keyboards 145
7.2.9 Enable the USBM-Code I/OInterface Kit 146
7.2.10 Enable Tooltips 146
7.2.11 Enable the Door Lock Switch Kit 146
7.2.12 Enable Feeds and Speeds Suggestions in Conversational Routines 147
7.2.13 Specify Probing and Tool Measuring Options 147
7.2.14 Use the RapidTurn Interface 147
7.2.15 Specify the 4th Axis Rotary Type 147
Enable the 4th Axis Homing Kit 147
7.2.16 Use a USB Camera 148
About USB Cameras 148
Manual Recording 148