©Tormach® 2023
Specifications subject to change without notice.
Page 19 Tormach 1100M® Operator's Manual (Version 1223A)
For the most recent version, see tormach.com/support
TABLE OF CONTENTS
DC-BUS Power Distribution Reference 241
12.8.3 Axis Movement is Noisy 241
12.8.4 Can't Reference All Axes 243
Limit Switch Function Reference 244
12.8.5 Lost Motion on Axis Travel 245
12.9 Spindle Drive Subsystem 247
12.9.1 The Spindle Won't Turn 248
Run and Direction Commands Reference 251
Spindle VFD Trip Reference 251
12.9.2 Machining Operations are Loud ("Chattery") 252
12.9.3 Can't Load or Unload a Tool, or the Spindle's Drawbar Drags Against the Power Drawbar Cylinder's Piston Bolt 253
12.10 Operator Console Troubleshooting 254
12.10.1 The Screen Doesn't Respond to Touch Inputs 254
12.10.2 The Screen Doesn't Display an Image or Respond to Power Button 255
12.10.3 The Screen is Scrambled or Illegible 255
12.10.4 The Knobs Don't Respond 256
12.10.5 The Buttons Don't Respond 257
DIAGRAMS AND PARTS LISTS
259
13.1 Base Machine Exploded View 260
13.2 Base Machine Parts List 261
13.3 Spindle Head Exploded View 262
13.4 Spindle Head Parts List 263
13.5 TTS Power Drawbar Cylinder Exploded View 265
13.6 TTS Power Drawbar Cylinder Assembly Parts List 266
13.7 Power Drawbar Push Button Exploded View 267
13.8 Power Drawbar Push Button Parts List 268
13.9 Spindle Motor Cover Exploded View 269
13.10 Spindle Motor Cover Parts List 270
13.11 X-Axis Assembly Exploded View 271
13.12 X-Axis Assembly Parts List 272
13.13 Y-Axis Assembly Exploded View 274
13.14 Y-Axis Assembly Parts List 275
13.15 Y-Axis Saddle Exploded View 277
13.16 Y-Axis Saddle Parts List 278
13.17 X-Y Axis Assembly Exploded View 279
13.18 X-Y Axis Assembly Parts List 280
13.19 Z-Axis Assembly Exploded View 281
13.20 Z-Axis Assembly Parts List 282
13.21 Enclosure Exploded View 284
13.22 Enclosure Parts List 285
13.23 Lubrication/Oil System Diagram 287
PNEUMATIC SCHEMATICS
289
14.1 Power Drawbar Pneumatics 290
To Next Page
