Tormach 1100M - Page 6

©Tormach® 2023
Specifications subject to change without notice.
Page 6 Tormach 1100M® Operator's Manual (Version 1223A)
For the most recent version, see tormach.com/support
INSTALLATION
37
4.1 Visual Installation Guide 38
4.2 Before You Begin 39
4.3 Installation Tools and Items 39
4.4 Move the Pallet 39
4.5 Assemble the Machine Stand 39
4.6 Unpack the Machine Crate 41
4.7 Install Core Components 42
4.7.1 Install the Y-Axis Bellows Spacers 42
4.7.2 Install the Axis Motors 43
Y-Axis Motor 43
X-Axis Motor 44
Z-Axis Motor 44
4.7.3 Lift and Move the Machine 45
Required Tools 45
Before You Begin 45
Assemble the Lifting Bar Kit 45
Connect the Machine for Lifting 46
Lift the Machine 46
4.7.4 Install the Tool Tray and Drip Guard 47
4.7.5 Install the Controller 47
Install the Controller Arm 48
Install the Monitor 49
Make Monitor Connections 49
Install the PathPilot Controller 50
Set Up the PathPilot Operator Console 50
4.7.6 Install the Oiler 51
Make Automatic Oiler Connections 51
Make Manual Oiler Connections 52
Set Up the Manual Oiler 52
4.7.7 Verify the Installation 52
Power On the Machine 52
Power Off the Machine 54
Verify Limit Switch Function 54
Verify Axes Function 54
Verify Spindle Function 55
4.8 Install Accessory Components 56
4.8.1 Set Up the Automatic Oiler 56
Look for Leaks and Clear the Lines 56
Specify the Interval Time 56
Specify the Actuation Time 57
4.8.2 Install the Power Drawbar 57
Required Tools 57
Air Requirements 57
TABLE OF CONTENTS