Tormach 1100M - Page 9

©Tormach® 2023
Specifications subject to change without notice.
Page 9 Tormach 1100M® Operator's Manual (Version 1223A)
For the most recent version, see tormach.com/support
TABLE OF CONTENTS
Install the Door Lock Switch Kit 97
Update PathPilot 99
Download and Install an Update File from the Controller 99
Install an Update File from a USB Drive 99
Enable the Door Lock Switch Kit 100
4.8.10 Install the PathPilot Operator Console 100
Required Tools 101
Prepare the Machine 101
Remove the Right Side Window 101
Remove the Operator Box 101
Install the Mount Arm 101
Mount the Console 102
Assemble the Controller and Keyboard Tray 102
Lift and Secure the Controller Assembly 104
Make Electrical Connections 105
Reassemble the Machine 107
PathPilot Operator Console Drill Template 108
4.9 Set Up the PathPilot Controller 109
4.9.1 Specify the Date and Time 109
4.9.2 Specify the Keyboard Language 109
4.9.3 Configure the Optional Touch Screen Kit 109
4.9.4 Update PathPilot 109
SYSTEM BASICS
111
5.1 System Reference 112
5.1.1 Machine Table 112
5.1.2 Spindle 112
About the Spindle 112
5.1.3 Axes 112
5.2 Basic Controls Reference 112
5.2.1 Machine Controls 112
5.2.2 PathPilot Interface 113
PATHPILOT INTERFACE OVERVIEW
115
6.1 About PathPilot 116
6.2 Notebook Section 116
6.2.1 Main Tab 116
6.2.2 File Tab 116
6.2.3 Settings Tab 117
6.2.4 Offsets Tab 117
6.2.5 Conversational Tab 117
6.2.6 Probe Tab 118
6.2.7 Status Tab 118
6.3 Persistent Controls 118
6.3.1 Program Control Area 118