Tormach 1100M - Page 8

©Tormach® 2023
Specifications subject to change without notice.
Page 8 Tormach 1100M® Operator's Manual (Version 1223A)
For the most recent version, see tormach.com/support
Required Tools 79
Unpack the 4th Axis 80
Lubricate the Rotary Table 80
Adjust the Backlash 80
To Set the Backlash by Positioning the Backlash Adjustment Screw 81
To Set the Backlash by the Numbers 81
Mount the Rotary Table 81
Set Up the microARC 4 82
Required Tools 82
Install in Machine 82
Center the Chuck Mounting Plate 83
Verify the Installation 84
4.8.6 Install the Chip Pans 84
4.8.7 Install the Backsplash and Splash Guard 85
4.8.8 Install the Enclosure 86
Before You Begin 86
Required Tools 87
Install the Enclosure Panels 87
Install the Left Rear Panel 87
Install the Left Side Panel 87
Install the Left Side Window Retainers 87
Install the Left Front Panel 88
Install the Enclosure Splice Plate 88
Install the Right Rear Panel 88
Install the Right Side Panel 88
Install the Right Side Window Retainers 88
Install the Right Front Panel 89
Install the Left Top Panel 89
Install the Right Top Panel 90
Install the Upper Front Panel 90
Install the Front Lower Panel 90
Install the Rear Splash Shield 91
Assemble the Linear Rails 91
Install the Linear Assemblies 91
Assemble the Front Doors 92
Install the Front Door Assemblies 93
Install the Door Latch 94
Install the Floodlights 94
Install the Side Windows 94
Install the Access Panel 95
Install the Stainless Steel Wear Guard 96
Use the Maintenance Labels 96
Write the Date on the Maintenance Labels 96
Replace the Windows 97
4.8.9 Set up the Door Lock Switch Kit (Optional) 97
TABLE OF CONTENTS