Toro Groundsmaster 5910 Series - Page 254

Steering/LiftControlManifoldInstallation(Figure130)(continued)
B.IfttingwasremovedfrommanifoldportLS(OR1)C3(OR3),C2(OR5)
andC5(OR7),installappropriateoriceinportbeforeinstallingtting.
C.Installttingsintomanifoldopeningsusingmarksmadeduringthe
removalprocesstoproperlyorientatettings.
D.Tightenhydraulicttingstotorquevalueprovided(Figure131).For
informationontighteningproceduresforhydraulicttings,seeInstalling
theHydraulicFittings(SAEStraightThreadO-RingFittings)(page5–9).
2.Positionsteering/liftcontrolmanifoldtotheframeandsecurewithfour(4)
angeheadscrews.
3.Removecapsandplugsfromttingsandhoses.Properlyconnecthydraulic
linestomanifold(seeInstallingHydraulicHosesandTubes(O-RingFace
Seal)(page5–7)).
4.Installhydraulicltertomanifold:
A.Lubricatethenewltergasketandllthelterwithhydraulicuid.
B.Ensurethattheltermountingareaiscleanandscrewthelteronuntil
thegasketcontactsthemanifold;thentightenthelteranadditional1/2
turn.
5.Usinglabelsplacedduringremoval,correctlyconnectwireharness
connectorstosolenoidsonliftcontrolmanifold.
6.Makesurehydraulictankisfull.Addcorrectoilifnecessary.
7.Checkhydraulicsystemforleaksbeforereturningthemachinetoservice.
8.SecureRHlowershroudtomachine.Lowerandsecurehood.
HydraulicSystem:ServiceandRepairs
Page5–154
Groundsmaster
®
5900&5910
16227SLRevB