Configuration example with SIMATIC Manager
TR-Electronic GmbH 2008, All Rights Reserved Printed in the Federal Republic of Germany
Page 226 of 252 TR - EMO - BA - DGB - 0019 - 08 06/06/2019
12.3 Incorporating encoTRive into the network
In accordance with the profile, the drive MD-300 can now be taken out of the
hardware catalog and attached to the PROFINET network.
Figure 28: Incorporating encoTRive into the network
For unique identification within the network, the device name previously allocated in
the device must be entered in the Object Properties.
Figure 29: Allocation of the device name in the configuration
To Next Page
Loading...
