Configuration example with SIMATIC Manager
TR-Electronic GmbH 2008, All Rights Reserved Printed in the Federal Republic of Germany
Page 228 of 252 TR - EMO - BA - DGB - 0019 - 08 06/06/2019
12.6 Parameterization via PROFINET
For cyclic or acyclic parameterization via PKW or RecordData, use of the available
function blocks with the relevant documentation is recommended.
In detail, these are:
● TR-EMO-TI-DGB-0067, TR-EMO-SW-DGB-0028
S7 function block for acyclic parameterization
● TR-EMO-TI-DGB-0068, TR-EMO-SW-DGB-0029
S7 function block for commissioning via PZD channel
To Next Page
Loading...
