Trimble GCS900 - A.9.2 Configuring third-party cellular modems

A SetupMenus
5. Select Remote Base.
6.
Press 7. The Machine Settings–Wireless Communications dialog appears.
7. Select Wi-Fi/Cell (SNM940).
A.9.2 Configuring third-party cellular modems
You can configure a third party cellular modem to receive network RTK corrections
or for wireless communications or .
Configuring to receive network RTK corrections
To configure the system to use a cellular modem for network RTK correction
reception:
1. Start the control box in Manager mode.
2. From the Setup Menu - Installation menu, select Machine Settings.
3. Press Edit Machine.
4.
Press 7 until you reach the Machine Settings–Positioning Radio Type
dialog:
148 GCS900 GradeControl System for Excavators Installation Manual