USTER HVI 900 - Page 151

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 7
Version 4.0 (1.99) Module Testing - Page 7-16
4.4.5 External Computer
This selection determines whether or not the test results will be sent to an
external computer system via a serial cable. It alternates between OFF
and ON using the ENTER key.
• OFF — The test results will not be transmitted to an external
computer system.
• ON — The test results will be transmitted to an external computer.
When the ENTER key is pressed while the External Computer item is
highlighted, the TRANSMISSION TYPE MENU will appear (thus selecting the
ON option). It is used to indicate which data should be transmitted.
Each of the options is described below.
•
Individual Observations - Data on the individual observations
for each module will be transmitted. For example, if the system is set
up to perform two Length/Strength tests, one Micronaire test, and
four Color/Trash tests, the data for each of these seven tests will be
transmitted.