USTER HVI 900 - Page 222

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 10
Version 4.0 (1.99) Synthetic Fiber Testing - Page 10-10
3.5.5 Calibration Status
Once the number of tests to be performed has been established, the
Calibration Status data should be entered.
• Select the Calibration Status item from the SYNTHETIC FIBER
CALIBRATION MENU.
It contains three menu options: Synthetic Fiber Standard Values,
Synthetic Fiber Calibration Constants, and Synthetic Fiber Calibration
Tolerances. Each is discussed below.