USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 14
Version 4.0 (1.99) Appendix - Page 14-40
Temperature
The temperature, as reported by the
optional probe, is outside the range
specified in the Status Menu.
The Valid Range This is displayed whenever an invalid value
Is x to x was entered from an entry box.
Unf Error Uniformity calculation resulted in a value
less than zero or greater than 99.
Weigh Sample This message will display if an operator
performs a micronaire test before a
sample mass has appeared on the test
display or if the sample weight is outside
the 8.5 to 11.5 gram range. The
micronaire cannot be calculated until the
sample weight value is displayed on the
test screen.
To Next Page
Loading...
