CHAPTER 6: System Configuration
116 Vcontroller
3 In the SNMP Station IP field, type the IP address.
4 Click Add.
Repeat this process to record the IP addresses of all other
management stations.
5 Type the password that will identify the appliance to
the Management Station or stations in the Community
String field.
This step is optional.
6 Click Enable SNMP Trap.
N
OTE
Although no traps are sent if the Enable SNMP Trap option
is disabled, triggered alarms are still logged by the
appliance.
When you have finished configuring the SNMP manage-
ment stations, click one of the following options:
Reset
To return the settings to the previous configuration.
Apply
To immediately commit the settings to the Firebox
Vclass appliance.
Log Configuration
Use the Log tab to configure the logging settings. For infor-
mation on configuring these settings, see “Log Settings” on
page 383.
Certificate Configuration
If you plan to use this Firebox Vclass appliance to manage
VPN connections that incorporate automatic (IKE) key
exchanges, you must purchase an x.509 authorization cer-
To Next Page
Loading...
