Running the Vcontroller Installation Wizard
Firebox Vclass User Guide 35
window, as described in “System Configuration” on
page 89.
Starting the Installation Wizard
1 Start the Firebox Vclass appliance (see “Start a Firebox
Vclass Security Appliance” on page 27).
2 Launch Vcontroller and click Login.
The Login dialog box appears.
3 Type the IP address or host name of the Firebox Vclass
in the Server IP/Name field or select it from the drop-
down list.
4 Type your administrator login name and password in
the appropriate fields. The default name and password
for the Firebox Vclass appliance is admin.
N
OTE
All data traffic between the Management Station and the
Firebox Vclass appliance, including all configuration
exchanges, is protected by SSL, using 128-bit RC4 and
SHA1.
5 Click OK.
The Installation Wizard Welcome page appears.
To Next Page
Loading...
