Using the Advanced Settings
Firebox Vclass User Guide 207
7 Click Done.
8 Repeat this process until a complete week’s schedule
has been recorded.
9 Click Done.
If you want to create a daily schedule that affects every day
of the week:
1 Select Daily.
2 Click Edit Day Schedule.
The Edit Day Schedule dialog box appears.
3 Select the Period 1 checkbox.
4 Type the values in the From and To fields, or use the
arrow buttons to adjust the values.
N
OTE
Remember to type afternoon and evening hours in military
time. For example, 1:00 PM must be entered as 13:00.
5 Repeat this process for the remaining periods, as
needed.
6 Click Done to close the Edit Day Schedule dialog box
and return to the New Schedule dialog box.
7 Click Done.
Using the Advanced Settings
Use the advanced policy settings to create global settings
or per policy settings for ICMP error message handling as
well as a per policy logging.
To configure the advanced settings:
1 Click Advanced.
The Advanced Policy Settings dialog box appears.
To Next Page
Loading...
