Watchguard V10 - Defining an RUVPN Security Policy and an Ipsec Action; Defining an Ipsec Action for RUVPN

Defining an RUVPN Security Policy and an IPSec Action
Firebox Vclass User Guide 343
drop-down list, select the appropriate certificate. Next,
select the
Local ID Type from the drop-down list. This
should be one that the peer system can validate with a
copy of your certificate sent to the peer system as well
as settings in their own policy.
For more information on using certificates, see the Vclass Mobile
User VPN Guide .
7 If you previously selected an IKE action that
incorporates the pre-shared key authentication type,
the Pre-Shared Key options become active.
8 Click String and then type and confirm the key in the
appropriate fields.
The key can consist of any combination of letters and numbers,
but it cannot contain blank spaces.
9 Click Done.
For more information on configuring IKE policy, see
“Defining an IKE Policy” on page 307.
Defining an RUVPN Security Policy and an
IPSec Action
After defining IKE actions and IKE policies, you must
define Security policies for the remote users and IPSec
actions.
Defining an IPSec action for RUVPN
To define an IPSec action:
1 From the main Vcontroller window, click IPSec Action.
The Policy Manager window and IPSec Action dialog box appear.
2 Click New.
The New IPSec Action dialog box appears.