CHAPTER 11: Using Virtual Private Networks (VPN)
310 Vcontroller
8 Select the Local ID Type from the drop-down list.
This should be a Local ID type that the peer system can validate
with a copy of your certificate sent to the peer system as well as
settings in their own policy.
9 If you previously selected an IKE action that
incorporates the pre-shared key authentication type,
the Pre-Shared Key options become active.
N
OTE
This key will be shared among all participating peer IKE
systems. If a remote peer does not use the same key, or if a
different authentication is used, negotiations will fail.
10 Click either String or Hex, and then type and confirm
the key in the fields.
The key can consist of any combination of letters and numbers,
but it cannot contain blank spaces.
11 Click Done.
Defining an IKE action
Your choice of IKE action defines how IKE peers authenti-
cate each other and which encryption method is used to
protect the negotiation process.
1Click New.
The New IKE Action dialog box appears.
To Next Page
Loading...
