Watchguard V10 - Qos Policy Examples; Example 1; Example 2

CHAPTER 9: Security Policy Examples
226 Vcontroller
and the IP address simply becomes a temporary location
for the duration of the connection.
QoS Policy Examples
When using QoS actions within your policies to prioritize
your network traffic, remember that any traffic streams not
included in explicit QoS actions will be affected by a
default QoS action with WFQ set to 5. The following exam-
ple shows how this works in conjunction with other QoS
policies.
Example 1:
Policy 1: QoS action A with WFQ weight = 5
Policy 2: No QoS
Policy 3: No QoS
Policy 4: QoS action B with WFQ weight = 10
Policy 5: No QoS
In this case, the ratio between all three QoS actions is 5
(default), 5 (QoS A), and 10 (QoS B). When the network
bandwidth is fully utilized, policy 1 traffic will use 25% of
the bandwidth, policy 4 will use 50%, and all other traffic
will share the remaining 25%.
Example 2:
Policy 1: QoS action A with WFQ weight = 15
Policy 2: No QoS
Policy 3: No QoS
Policy 4: QoS action B with WFQ weight = 5
Policy 5: No QoS