Watchguard V10 - CHAPTER 3 Getting Started

Firebox Vclass User Guide 21
CHAPTER 3 Getting Started
The Firebox Vclass appliance acts as a barrier between
your networks and the public Internet, protecting
them from security threats. This chapter explains how
to install the Firebox Vclass appliance into your net-
work. You must complete the following steps in the
installation process:
• “Gathering Network Information” on page 22
• “Setting up the Management Station” on page 23
• “Cabling the Appliance” on page 27
• “Start a Firebox Vclass Security Appliance” on
page 27
• “Using Appliance Discovery” on page 29
• “Running the Vcontroller Installation Wizard” on
page 34
• “Deploying the Firebox Vclass into your
Network” on page 57
For a quick summary of this information, see the
WatchGuard Firebox Vclass QuickStart Guide included
with your Firebox Vclass appliance.