Watchguard V10 - Hacker Prevention Configuration

CHAPTER 6: System Configuration
132 Vcontroller
- The result is then rounded down to the next
lower multiple of 8 bits (8-bit aligned) to
determine the size in bytes that is required for
packet transmission.
The results of this calculation are used as the MSS
for the connection.
Limit to N Bytes (40-1460)
This limits MSS to the specified size in bytes.
No Adjustment
This specifies that no change be made to the TCP
header. If you select this option, packets may
fragment.
When you have finished configuring the advanced set-
tings, click one of the following options:
Reset
To return the settings to the previous configuration.
Apply
To immediately commit the settings to the Firebox
Vclass appliance.
Hacker Prevention Configuration
If you have not already used the Installation Wizard to set
up hacker prevention options, you can do so now with the
Hacker Prevention tab. If you have made these entries,
you can edit them by using this tab’s features.
1 Click the Hacker Prevention tab.
The Hacker Prevention settings are displayed.