Watchguard V10 - Configuring Interface 1

Interface Configuration
Firebox Vclass User Guide 99
9 In the Remote DHCP Server IP field, type the address
for the remote DHCP server.
10 Click the Link Speed Configuration option you want to
use for this interface. The default is Auto Negotiate.
Auto Negotiate is the only option available on the V100 and
V200 models.
11 Click OK to close the Edit Interface dialog box and
return to the Interface tab.
Configuring Interface 1
To edit the interface settings:
1 Select the interface entry and then double-click.
The Edit Interface dialog box appears.