Watchguard V10 - A Catalog of Real-Time Monitor Probe Counters; System Counters

CHAPTER 14: Monitoring the Firebox Vclass
368 Vcontroller
To conserve system resources, you can temporarily disable
any probes until the next time you want to monitor that
particular system activity. At that time, you can re-enable
the probe and observe the results in the Real-Time Chart
window.
A Catalog of Real-time Monitor Probe
Counters
System Counters
Counter Name Function
CPU Util. (%) System CPU utilization
Memory Util. (%) System memory utilization
Interface 1(Public)Status (1=up) Interface 1 status (1-up; 0-down)
Interface 0(Private)Status (1=up) Interface 0 status (1-up; 0-down)
Interface 2(DMZ)Status (1=up) Interface 2 status (1-up; 0-down)
System Throughput bytes/sec Number of bytes processed per second
Packets Recv/sec Packets received rate (packets/second)
Packets Sent/sec Packets sent rate (packets/second)
IPSec Throughput bytes/sec IPSec traffic throughput (bytes/sec)
IPSec Packets/sec IPSec traffic throughput (packets/sec)
Total IPSec Tunnels Total number of active IPSec tunnels
Interface 1(Public)Recv.
(Bytes)
Number of bytes received from Interface
1 (bytes)