July, 2007
4-89
WorkCentre 5020
REP 11.4.2
Repairs and Adjustments
Initial Issue
Replacement
1. To install, do the removal steps in reverse order.
2. When installing the Tray 2 Retard Roll, align the coupling of the Friction Clutch with the
Tray 2 Retard Roll (Figure 5).
Figure 5
3. When installing the Tray 2 Retard Roll Housing, check that the Tray 2 Retard Roll rises
when the Holder Arm is pressed (Figure 6).
A Holder Arm
B Tray 2 Retard Roll
Figure 6
To Next Page
Loading...
