July, 2007
4-19
WorkCentre 5020
REP 4.1.1
Repairs and Adjustments
Initial Issue
REP 4.1.1 Drum Cartridge
Parts List on PL 4.1
Removal
WARNING
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1. Open the Simplex/Duplex Module.
2. Open the Front Cover.
3. Remove the Drum Cartridge (Figure 1).
1 Release the tab.
2 Remove the Drum Cartridge.
Figure 1
Replacement
1. To install, do the removal steps in reverse order.
2. When installing the Drum Cartridge, align the protruding end of the Drum Cartridge with
the cavity in the frame (Figure 2).
Figure 2
To Next Page
Loading...
