Xerox WorkCentre 5020 - REP 10.3.2 Flexible Print Cable (SCC)

July, 2007
4-73
WorkCentre 5020
REP 10.3.1, REP 10.3.2
Repairs and Adjustments
Initial Issue
3. Attach the Carriage Cables (black and silver) to the IIT Frame in the sequence shown
(Figure 13).
Figure 13
REP 10.3.2 Flexible Print Cable (SCC)
Parts List on PL 10.3
Removal
WARNING
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1. Remove the following parts:
• Platen Cover (PL 10.1)
• Control Panel (REP 8.3.1)
2. Remove the IIT Upper Cover (REP 10.2.1).
3. Remove the IIT Carriage (REP 10.3.1).
4. Remove the Core Clip (Figure 1).
1 Remove the Core Clip.
Figure 1 Removing the Core Clip