vii
Storage and Transportation
Installation
• Do not store or install the MP2300 in the following locations.
There is a risk of fire, electrical shock, or device damage.
• Direct sunlight
• Ambient temperature exceeds the storage or operating conditions
• Ambient humidity exceeds the storage or operating conditions
• Rapid changes in temperature or locations subject to condensation
• Corrosive or flammable gas
• Excessive dust, dirt, salt, or metallic powder
• Water, oil, or chemicals
• Vibration or shock
• Do not overload the MP2300 during transportation.
There is a risk of injury or an accident.
• Never use the MP2300 in locations subject to water, corrosive atmospheres, or flammable gas, or
near burnable objects.
There is a risk of electrical shock or fire.
• Do not step on the MP2300 or place heavy objects on the MP2300.
There is a risk of injury.
• Do not block the air exhaust port or allow foreign objects to enter the MP2300.
There is a risk of element deterioration inside, an accident, or fire.
• Always mount the MP2300 in the specified orientation.
There is a risk of an accident.
• Do not subject the MP2300 to strong shock.
There is a risk of an accident.
CAUTION
CAUTION
To Next Page
Loading...
