YASKAWA JEPMC-MP2300-Y Series User Manual

2.1
Model System Startup Procedure
2-7
2.1.5 Starting and Preparing MPE720
This section describes the preparation for connecting the MPE720 (motion programming software,
optional) to the MP2300 and the method for installing the sample program for the MP2300.
The explanation is given assuming that the MPE720 has been installed on your personal computer.

Refer to Machine Controller MP900/MP2000 Series MPE720 Software for Programming Device
User’s Manual (Manual No. SIEP C880700 05
 ) for the installation method of MPE720.
The reference sections for the MPE720 startup procedure and each operation as follows.
1.
Starting the MPE720
→
2.1.5 ( 1 ) Starting the MPE720 on page 2-8
2.
Communication process settings
Define the communication with MP2300.
→
2.1.5 ( 2 ) Setting and Saving Communication Process on page 2-9
3.
Create a group folder
Create a Group Folder to save Order Folders.
→
2.1.5 ( 3 ) Creating Group Folders (Option) on page 2-15
4.
Create an order folder
Create an Order Folder to save Controller Folders.
→
2.1.5 ( 4 ) Creating Order Folders (Required) on page 2-16
5.
Create a controller folder
Create a Controller Folder to save programs.
→
2.1.5 ( 5 ) Creating Controller Folders (Required) on page 2-17

YASKAWA JEPMC-MP2300-Y Series Specifications

General

Brand	YASKAWA
Model	JEPMC-MP2300-Y Series
Category	Controller
Language	English