Zebra VC8300 - Enabling DataWedge; Disabling DataWedge

Data Capture
103
Enabling DataWedge
1. Swipe up from the bottom of the Home screen and touch .
2. Touch > Settings.
3. Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that
DataWedge is enabled.
4. Touch .
Disabling DataWedge
1. Swipe up from the bottom of the Home screen and touch .
2. Touch > Settings.
3. Touch the DataWedge enabled checkbox. The blue checkmark disappears from the checkbox indicating
that DataWedge is disabled.
4. Touch .