Apps
62
Device Central
Device Central displays detailed information about the device and connected peripherals, and supports the
following Zebra devices:
• RS6000 Bluetooth Ring Scanner
• HS3100 Bluetooth Headset.
Device Central features include:
• Discovering and pairing with supported peripherals via Bluetooth or corded connection.
• Paging a connected RS6000 Ring Scanner.
• Updating the firmware of supported ring scanners. For information on updating ring scanner firmware using
Device Central, refer to the RS6000 User Guide.
• Displaying the connection status of peripherals.
• Displaying information for a connected peripheral in the notification bar.
Figure 37 Device Central Screen
Scan and Pair Tab
Pairing to a Bluetooth peripheral is accomplished by one of the following methods:
• Scan and Pair
• Scan to Pair
• Manually Pairing.
Scan and Pair
To scan the peripheral Bluetooth barcode to pair:
1. In the Scan and Pair tab, touch Scan barcode to pair.
2. The peripheral’s scan beam illuminates. Scan the Bluetooth MAC address barcode label on the desired
peripheral to pair.
Ensure that Bluetooth is enabled on the peripheral and is set to discoverable mode. Refer to the peripheral
user guide for instructions.
To Next Page
Loading...
Need help?
General
Weight and Dimensions