Accessories and Mounting
121
VC8300 Antenna Options
Antenna hardware configurations are located in Table 14 on page 120. To determine the best antenna option
for your location, contact your Zebra representative.
IMPORTANT: If using a magnetic mount antenna, place it in a location that balances the need for the VC8300 to
communicate
with the access points and local Bluetooth peripherals
.
MNT-VC80-ADPA1-1 Adapter for VC50 U-Mount.
MNT-VC80-ADPB1-1 Adapter for Honeywell U-Mount.
KT-U-MOUNT-VC80-R U-Mount, with VC70 and 8585 / 8595 U-Mount hole pattern. Includes
MNT-VC80-ADPA1-1 adapter.
Speaker/Mic
M1000 Speaker/Mic with push-to-talk function.
Miscellaneous
KT-VC80-BTRY1-01 Spare battery
WA4070 Ethernet to USB Dongle.
KT-AREFL-VC83-8-1 Anti Reflection Foil, pack of 3.
Power Supplies and Cables
PS000145A01 100/240 VAC power supply, 24 VDC, 6.5 A, 150W (AC power cord sold
separately)
PS1370 Pre-Regulator, 24 - 90 VDC in, 15 VDC out, 90 W
PS1450 100/240 VAC power supply, 12 VDC, 6 A. (AC power cord sold separately)
CB000417A01 DC power adaptor to VC50 extension cable
CB000416A01 DC Power adaptor to VC70 extension cable
CA1210 Power extension cable, DC, 6', waterproof
CA1230 Power extension cable for pre-regulator
CA1220 Power extension cable, DC, 180 cm, with ignition sense
CA1300 Screen blanking cable (DB9 to open wires)
A9169798 Adapter CPC to LXE/Honeywell VCX8, VX9, VM1, VM2 and VM3 DC Power
Extension Cable.
A9169801 Adapter CPC and Serial to LXE VCX8 and VX9 DC Power Extension and
Screen Blanking Cable.
Table 14 Accessories (Continued)
Model Number Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions