17
Getting Started
Introduction
The VC8300 is a rugged, vehicle mounted computer running Android 8.1.0 Oreo operating systems.
Wireless communications are supported over a 802.11 WLAN network. The Bluetooth module
supports Bluetooth printers and scanners. The VC8300-8 contains an integrated keyboard in either
QWERTY or AZERTY alphanumeric keyboard layout. It features 54 keys, 12 direct function keys, and
a power button.
The VC8300 is intended for use in commercial and industrial applications with a focus on real time
wireless data transactions with options suiting materials handling applications in warehouses,
manufacturing facilities, ports, yards, and freezers.
Unpacking
WARNING: Before operating the unit for the first time, carefully read Safety on page 17.
NOTE: Configure the VC8300 before fastening it to machines or vehicles.
Carefully remove all protective material from the device and save the shipping container for later
storage and shipping.
Inspect the equipment for damage. If any equipment is missing or damaged, contact the Zebra
Support Center immediately. See Service Information on page 16 for contact information.
Removing the Protective Film from the Display
The front display of the VC8300 is protected during transport by a transparent film. This film should
remain on the front display during assembly to avoid damage to the front display surface. Only remove
the film once all of the assembly work has been completed.
Safety
In order to prevent injury and damage, observe the following safety guidelines prior to assembly and
commissioning. The VC8300 is a multifunction vehicle computer for stationary and mobile use in
commercial environments such as, warehouses, manufacturing, yard/ports, and freezers. Different or
extraordinary usage is not permitted. For resulting damage, the user/operator of the VC8300 is solely
responsible. This also applies to any changes that you make to the device. Compliance with the safety
To Next Page
Loading...
Need help?
General
Weight and Dimensions