EasyManuals Logo

Zebra VC8300 User Manual

Zebra VC8300
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #199 background imageLoading...
Page #199 background image
Application Deployment
199
The StageNow Workstation tool installs on the staging workstation (host computer) and lets the
administrator easily create staging profiles for configuring device components, and perform other staging
actions such as checking the condition of a target device to determine suitability for software upgrades or
other activities. The StageNow Workstation stores profiles and other created content for later use.
The StageNow Client resides on the device and provides a user interface for the staging operator to initiate
staging. The operator uses one or more of the desired staging methods (print and scan a bar code, read an
NFC tag or play an audio file) to deliver staging material to the device.
For more information go to: techdocs.zebra.com
.
ADB USB Setup
To use the ADB, install the USB driver. This assumes that the development SDK has been installed on the
host computer. Go to developer.android.com/sdk/index.html
for details on setting up the development SDK.
ADB driver for Windows and Linux are available on the Zebra Support Central web site at
www.zebra.com/support
. Download the ADB and USB Driver Setup package. Following the instructions with
the package to install the ADB and USB drivers for Windows and Linux.
Enabling USB Debugging
By default, USB debugging is disabled. To enable USB debugging:
1. Swipe down from the Status bar to open the Quick Access panel and then touch .
2. Touch System > About phone.
3. Scroll down to Build number.
4. Tap Build number seven times. The message You are now a developer! appears.
5. Touch .
6. Touch Developer options.
7. Slide the USB debugging switch to the ON position.
8. Touch OK.
9. Connect the device to the host computer.
The Allow USB debugging? dialog box appears on the device.
10.On the device, touch OK.
11.On the host computer, navigate to the
platformtools folder.
12.Type
adbdevices.
The following displays:
Listofdevicesattached
XXXXXXXXXXXXXXXdevice
(where XXXXXXXXXXXXXXX is the device number).
NOTE: If device number does not appear, ensure that ADB drivers are installed properly.
13.Touch .

Table of Contents

Other manuals for Zebra VC8300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra VC8300 and is the answer not in the manual?

Zebra VC8300 Specifications

General IconGeneral
Display diagonal8 \
Touchscreen typeCapacitive
Display resolution1280 x 720 pixels
Flash memory32 GB
Internal memory4 GB
Internal memory type-
Number of cores8
Processor model660
Processor familySnapdragon
Processor frequency2.2 GHz
Operating system version8.1
Operating system installedAndroid
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version5.0
SpeakersMono
RS-232 input ports2
Headphone connectivity3.5 mm
USB 2.0 ports quantity1
Operating temperature (T-T)-30 - 50 °C
Battery capacity- mAh
Product colorBlack
Keyboard layoutQWERTY
International Protection (IP) codeIP66
Harmonized System (HS) code84713000
Weight and Dimensions IconWeight and Dimensions
Depth90 mm
Width276 mm
Height238 mm
Weight3700 g