Apps
65
Unpairing a Peripheral
To unpair a Bluetooth peripheral:
1. In the Scan and Pair tab, touch Unpair for the desired peripheral to unpair.
A confirmation pop-up message appears.
2. Touch OK.
3. Once unpaired, a message appears indicating the peripheral has been disconnected, and the peripheral is
removed from the list.
Paging an RS6000 Ring Scanner
Use the Page button to easily locate the currently connected RS6000 Ring Scanner:
1. With the RS6000 Ring Scanner connected, swipe up from the bottom of the Home screen, and touch .
NOTE: The RS6000 Ring Scanner must be within 10 m (32 ft) of the VC8300.
2. Under the RS6000 peripheral information, touch Page to begin paging the RS6000. The paged RS6000
beeps and vibrates.
To stop paging, press the scan trigger of the RS6000. On a triggerless RS6000, stop paging by resetting the
RS6000.
To Next Page
Loading...